A cold email technical setup has 12 steps, from deciding your volume and buying separate domains to launching, watching the numbers and replacing inboxes that get flagged. From buying domains to full volume takes about 4 weeks, most of it warm-up, and you send at full volume from week 5. For 30 inboxes you pay $202.10 before your first cold email goes out, plus your sending tool: $84.00 for the inboxes at Premium Inboxes with the Premium Inboxes coupon code FIRST20, and $118.10 for a year of 10 domains.
A done-for-you provider takes some of these steps off your hands. Premium Inboxes says it sets the DNS records, adds profile photos and forwarding rules, and uploads the inboxes into Instantly or Smartlead with warm-up started. The rest stays with you: your volume, domains, list, legal footer, sequence and the numbers you watch after launch. The prices on this page are Premium Inboxes’ because its 30-inbox bill is the one we test at checkout every day. The steps apply to any provider.
The cold email technical setup checklist at a glance
The third column shows what Premium Inboxes says it does for you, from its home and pricing pages on 13 November 2026. Week 1 starts the day your inboxes arrive.
| Step | What you do | Done for you? | When |
|---|---|---|---|
| 1. Decide your volume | People to reach, daily limit, inbox count | No | Day 0 |
| 2. Buy domains | 2 or 3 inboxes per domain, each domain redirected to your site | No, you bring your own | Day 0 |
| 3. Choose Google or Microsoft | One platform or a split | You choose, they build | Day 0 |
| 4. DNS records | SPF, DKIM and DMARC on every domain, then check them | Yes, you check | Day 0 to 1 |
| 5. Sender profiles | Real names, photos, signatures, reply forwarding | Photos and forwarding yes; names and signatures you | Day 0 to 1 |
| 6. Sending tool | Connect inboxes, set daily caps and tracking | Upload yes, settings you | Day 1 |
| 7. Warm-up | Two weeks of warm-up only, then a slow ramp | Started for you, the ramp is yours | Weeks 1 to 4 |
| 8. List | Chosen business contacts, verified, bounces under 2% | No | Weeks 1 and 2 |
| 9. Legal footer | Postal address, opt-out and a clear ad statement | No | Week 2 |
| 10. Sequence | At least 4 cold emails per person | No | Week 2 |
| 11. Launch and watch | Spam rate, bounces, replies | No | Week 3 on |
| 12. Replace flagged inboxes | Spot them and report them | Replacement yes | Ongoing |
The rules to know before you buy
Three sets of rules apply before you buy anything: what Gmail and Outlook.com ask of senders, what Google and Microsoft allow on their own business accounts, and the law where your recipients live.
Gmail and Outlook.com
Google’s sender guidelines cover mail to personal Gmail addresses, the ones ending in @gmail.com or @googlemail.com. Every sender needs SPF or DKIM, and Google’s FAQ says to keep the spam rate below 0.1% and never let it reach 0.3%. A sender that sends close to 5,000 messages a day to personal Gmail addresses counts as a bulk sender, adding up everything sent from the same main domain. Bulk senders must also publish DMARC, which can be set to “none”, and their marketing messages must support one-click unsubscribe.
Microsoft said in April 2025 that domains sending more than 5,000 messages a day to its consumer addresses (outlook.com, hotmail.com and live.com) need SPF and DKIM to pass and DMARC of at least “none”. It said that from 5 May 2025 their mail that fails those checks would go to Junk, with rejection to follow on a date it would announce later.
Where 30 inboxes sit against the 5,000 line
Thirty inboxes sending 15 cold emails a day send 450 a day. Spread over 10 domains, that is 45 a day per domain, and only the part addressed to personal Gmail or Outlook.com addresses counts toward either 5,000 line. The 5,000-a-day rules do not apply at this size, but Google still recommends that you “always set up SPF, DKIM, and DMARC” for your domains, so step 4 sets all three.
Google’s and Microsoft’s own account rules
None of the 9 setup guides we read on 13 November 2026 quotes Google’s or Microsoft’s own rules on unsolicited mail. Google Workspace’s Acceptable Use Policy forbids using its accounts “to generate, distribute, publish or facilitate unsolicited mass email, promotions, advertisements or other solicitations”. Google’s Workspace terms, read on 13 November 2026, let Google “Suspend all or part of Customer’s use of the Services” over use that breaks that policy, and another clause lets it suspend “immediately” when it believes that is needed to protect the service or its other customers. Google’s sender guidelines also say “Don’t send messages to people who didn’t sign up to get messages from you.”
Microsoft’s product terms, read on 13 November 2026, say its online services may not be used “to spam or distribute malware”, and that breaking that policy “may result in suspension of the Online Service”. Microsoft’s Exchange Online limits exist “to discourage the delivery of unsolicited bulk messages”, and Microsoft says customers who need bulk commercial email should use third-party providers.
Neither Google nor Microsoft names a safe number of cold emails. Sending a few a day from each inbox, to business contacts you picked for a reason, with an easy way to say no, lowers the risk of complaints. It does not make cold email something either company has agreed to, and buying from a provider does not change their rules.
The law
In the US, the FTC’s CAN-SPAM guide says the law covers all commercial email and “makes no exception for business-to-business email”. The guide puts the penalty at up to $53,088 for each email that breaks it. Step 9 covers what it asks for. Other countries have their own rules, so check the law where your recipients are before you send. This guide is not legal advice.
Step 1: Decide your volume and inbox count
Start from the number of new people you want to reach every 4 weeks; the inbox count follows from it. At 15 cold emails per inbox a day and three cold emails per person, one inbox reaches about 100 new people every 4 weeks, so 30 inboxes reach about 3,000. At four cold emails per person, which step 10 suggests, it is 75 and 2,250, so pick the sequence length now as well. Our guide on how many cold email inboxes you need works through other daily limits, sequence lengths and sizes.
Settle these numbers before you buy anything: the sequence length, the inbox count, which sets the domain count in step 2, and the daily limit per inbox, which you will type into your sending tool in step 6. This guide uses 30 inboxes at 15 a day throughout.
Step 2: Buy separate sending domains
Never send cold email from your main company domain. Smartlead explains the risk plainly: a few spam complaints on your main domain can push your invoices, support replies and everyday sales email into spam. Buy separate domains instead, and put 2 or 3 inboxes on each, which is Smartlead’s recommendation. Thirty inboxes at 3 per domain need 10 domains.
Pick names a reader can link to your company, register them as .com where you can, and point each one at your main website with a redirect. Smartlead warns that a sending domain which shows nothing “looks like a throwaway spam domain”. The redirect also helps a reader who types the domain into a browser to check who you are.
Premium Inboxes does not sell domains. Its home page says “Bring your own domains – we don’t sell them”, so you buy them yourself. A .com at Porkbun cost $11.81 a year on 13 November 2026, according to Porkbun‘s own price feed, so a year of 10 domains costs $118.10. Our Premium Inboxes pricing guide lists what else you pay for beyond the inboxes.
Step 3: Choose Google or Microsoft inboxes
Either can carry this guide’s numbers: Google Workspace allows 2,000 messages a day per account and Microsoft allows 10,000 recipients a day per mailbox, both far above 15 a day.
Premium Inboxes recommends “diversifying your volume across both platforms to minimize risk”. Its price does not change with the choice: our checkout test on 13 November 2026 showed $105.00 for 30 Google Workspace inboxes and $105.00 for 30 Microsoft 365 inboxes, both $84.00 on the first bill with FIRST20.
Buying from a provider is optional. Our guide on buying Premium Inboxes or setting up the accounts yourself weighs the two and walks through setting up and testing the accounts yourself. If you go that way, every “done for you” in the table above becomes yours.
Step 4: Publish SPF, DKIM and DMARC on every domain
Each sending domain needs three DNS records, the settings at your domain company that tell other mail servers who you are:
- SPF lists the servers allowed to send mail for the domain. If Google or Microsoft sends your mail, its servers must be on the list.
- DKIM adds a signature to every message so the receiving server can check it really came from you. Gmail needs a key of at least 1024 bits, and Google recommends 2048 if your domain company supports it.
- DMARC tells receiving servers what to do with mail that fails SPF and DKIM. Start at “none”, which Google and Microsoft both accept, and watch the reports before you tighten it.
Premium Inboxes says its engineers “manually configure and verify every DNS record (SPF, DKIM, DMARC)”. Check anyway once your inboxes arrive. Google’s free Check MX tool reads a domain’s MX and SPF records and, if you enter your DKIM selector, its DKIM record too. Ten domains means ten checks. Google says mail that fails these checks can be marked as spam or rejected.
Step 5: Set up sender profiles for real people on your team
Every inbox should belong to a real person at your company, with their real name, a profile photo and a short signature with the company name and your postal address from step 9. One person can have an inbox on each domain, so three people across 10 domains make 30 inboxes. Google’s sender guidelines say display names should be used “exclusively to identify the sender”, with nothing from the subject line in them, and they warn against subject lines that start with “Re:” or “Fwd:” unless the message is a real reply or forward.
Replies land in 30 different inboxes, so route them to one inbox someone reads every day. Premium Inboxes says it handles everything “from profile photos to forwarding rules”; you still supply the names, photos and the address replies should reach.
Step 6: Connect a sending tool and set its limits
A sending tool such as Instantly or Smartlead sends your sequence from all 30 inboxes, spreads the daily volume and runs warm-up. Premium Inboxes says it uploads the inboxes “directly into your sequencer (Smartlead, Instantly)”. Three settings stay with you:
- The daily cap per inbox: follow the warm-up plan in step 7, and never go above the daily limit you chose in step 1.
- Sending days and hours: weekdays, in your recipients’ working hours.
- Tracking: Instantly says open-tracking pixels can trigger spam filters and, on a shared tracking domain, tie your reputation to other senders. Set up a custom tracking domain or turn open tracking off. Replies tell you more than opens anyway.
Step 7: Warm up before the first cold email
A new inbox has no sending history, so Google and Microsoft do not trust it yet. Warm-up builds that history: your inboxes send warm-up messages to other inboxes in the tool’s pool, which open them and reply to many of them. Instantly’s help centre says an account is ready for campaigns after “at least 2 weeks” of warm-up and a health score above 90%. The health score is the share of warm-up messages that land in the inbox rather than spam over the last seven days.
The plan this site recommends, from our homepage, sends no cold emails in weeks 1 and 2, then up to 5 per inbox a day in week 3, up to 10 in week 4 and up to 15 from week 5. Keep warm-up running after you launch. A new inbox sends far less in its first month than later; the inbox guide linked in step 1 works out what that means for 30 inboxes on the first bill.
Step 8: Build and check your list while you warm up
The two warm-up weeks are the time to build your list. Choose business contacts you have a real reason to write to, at companies your offer fits. Google’s sender guidelines say “Don’t purchase email addresses from other companies”, and warn that people who never signed up “might mark your messages as spam, and future messages to these recipients will be marked as spam”.
Run every address through an email checker before it goes into your sending tool, and drop the ones it marks invalid. Instantly’s 2026 benchmark report calls a bounce rate under 2% ideal and says to pause and clean your list if bounces run higher. It also warns about catch-all addresses, which accept any address at the company and are hard to check, so treat them with care.
Check you have enough people, too. At 3,000 new people every 4 weeks, 30 inboxes need a steady supply. If you cannot find that many good contacts, buy fewer inboxes.
Step 9: Add the legal footer
The FTC’s CAN-SPAM guide lists what every commercial email to a US recipient needs, cold or not:
- Accurate “From”, “To” and “Reply-To” details that identify you.
- A subject line that matches the message.
- A clear statement that the message is an advertisement. The law leaves the wording up to you, but it must be clear and easy to see.
- Your valid physical postal address: a street address, a registered post office box or a registered private mailbox.
- A clear way to opt out, such as replying to say no. Opt-outs must keep working for at least 30 days after you send, and you must honour them within 10 business days.
A short signature with your name, company and postal address, and one line such as “Not interested? Reply and I will not write again”, covers the address and the opt-out, but not the advertisement statement. Then keep a list of everyone who says no and remove them from every inbox, not only the one they replied to.
Step 10: Write the sequence
A sequence is the first cold email plus the follow-ups that go out if nobody replies. Instantly’s benchmark report found 58% of replies come from the first cold email and 42% from steps 2 to 4, and advises “at least 4 emails” per campaign. At four cold emails each, 30 inboxes reach about 2,250 new people every 4 weeks, as step 1 says. Write the first cold email to stand on its own, keep every subject line true to the message, and give each follow-up something the first one did not say.
Step 11: Launch and watch three numbers
Start in week 3 at up to 5 cold emails per inbox a day, and watch three numbers every day for the first weeks:
- Spam rate: Google’s target is below 0.1%, and never 0.3% or higher. Google Postmaster Tools shows it once you add and verify each sending domain, which takes one more DNS record each. It only covers mail to personal Gmail addresses and leaves out days with too little of that mail, so at this size it may show nothing. Instantly’s benchmark report suggests inbox placement tests as another check.
- Bounce rate: under 2%. If it rises above that, pause the campaign and clean the list before you send again.
- Replies, inbox by inbox: an inbox whose replies fall away while the others hold steady may be landing in spam.
Raise the daily cap only when the plan in step 7 says so and these numbers are healthy. Google’s own advice is to increase volume slowly.
Step 12: Replace inboxes that get flagged
You usually find out an inbox has been flagged when your sending tool shows it as disconnected or its warm-up health drops. Premium Inboxes lists “Unlimited Replacement inboxes” on its Start Up, Growth and Enterprise plans on its pricing page. A replacement is a new inbox with no sending history, so on the plan this site recommends it warms up again before it sends cold email. If losing a few inboxes for two weeks would stall your campaign, plan for spares: our inbox guide shows what a 20% buffer costs on 30 inboxes.
Your first five weeks, task by task
This is who does what for 30 inboxes at Premium Inboxes, from the day you order to full volume. Where it says Premium Inboxes, that is what its home page said it does on 13 November 2026.
| When | Task | Who |
|---|---|---|
| Day 0 | Decide inbox count and daily limit; buy 10 domains and redirect them to your site | You |
| Day 0 | Order 30 inboxes with FIRST20; list your domains on the intake form and give access | You |
| Day 0 to 1 | Create the inboxes, set SPF, DKIM and DMARC, add photos and forwarding, upload to Instantly or Smartlead, start warm-up | Premium Inboxes, which gives its delivery time as under 6 hours |
| Day 1 | Check every domain’s records; set daily caps, sending hours and tracking; add and verify your domains in Postmaster Tools | You |
| Weeks 1 and 2 | Build and verify the list; write the sequence; add the signature, postal address, opt-out line and ad statement | You |
| Week 3 | Launch at up to 5 cold emails per inbox a day; watch spam rate, bounces and replies daily | You |
| Week 4 | Raise to up to 10 a day if the numbers are healthy | You |
| Week 5 on | Up to 15 a day; report flagged inboxes for replacement | You report, Premium Inboxes replaces |
Before the first cold email you pay $202.10: $84.00 for the first inbox bill and $118.10 for a year of 10 domains, plus your sending tool. FIRST20 takes 20% off a new account’s first bill only, so the bill at the start of week 5 is the normal $105.00, charged every 4 weeks.
Questions about cold email setup
Do I need DMARC if I send fewer than 5,000 cold emails a day?
Set it up anyway. Google requires DMARC only from bulk senders, about 5,000 a day to personal Gmail addresses, and Microsoft set the same line for Outlook.com addresses, but Google recommends SPF, DKIM and DMARC for every domain. A DMARC record set to “none” asks receiving servers to take no specific action on mail that fails, and if you add a reporting address, receiving servers send you reports on who is sending mail in your name.
How soon can I send my first cold email?
On the plan this site recommends, in week 3, after two weeks of warm-up only. Instantly’s help centre also says at least 2 weeks and a health score above 90%, unless the account was bought already warmed up.
Does FIRST20 cover the domains?
No. Premium Inboxes does not sell domains, and FIRST20 takes 20% off a new account’s first bill for inboxes only. On 30 inboxes that is $21.00 off, so the first bill is $84.00 instead of $105.00.
Is cold email legal in the US?
CAN-SPAM sets rules for commercial email rather than banning it, and it covers business-to-business email too: true headers and subject lines, a clear statement that the message is an advertisement, a postal address and an opt-out you honour within 10 business days. Google’s and Microsoft’s own account rules are a separate matter, covered above. Other countries have their own laws, so check where your recipients are, and ask a lawyer if you are unsure.
What happens if Google or Microsoft suspends one of my inboxes?
Stop sending from it and ask your provider for a replacement, which warms up for two weeks like any new inbox. If several go at once, look at your list and your spam rate before you replace them.
Start your setup
Work out your inbox count first with the price calculator on our homepage, buy your domains, then order your inboxes and enter FIRST20 at checkout on Premium Inboxes. You can see how we check the code, and every daily result, on our How We Test page.
Disclosure: if you buy through a link on this site we may earn a referral fee. Your price and the 20% stay the same either way.